Page Content (OCR)
10 15 20 25 30 35 40 45 50 55 89 solid magnets — where any of the moving magnets in the system could be guided (retracted or pushed forward) - which have similar polarity positioning, as the outer side of the o-ring magnet (294A, 294B), where the repulsion forces and energy of the magnet(s) (361) — and the potential energy of string(s)(352, 354) - are used to keep the o-ring in motion of back and forth (360) along the wire, and by principal of motion of coil moving within a magnetic field, thus creating current within the coil wiring, thus creating new energy or power, in addition to the original supply, where this can be repeated for several times, where the feed from the magnetic winding, like of the o-rings, can be connected to another wire (295) or be feed back (350) to the original feeding wire for it become the supplier to the system instead of the original input for the original supply input to be disconnected (351) for the system to become perpetual or self-sustaining, where the same can be separated, or the new power is feed back to the original line so proportionally increasing the power in the original wire, where in reality with use of induction field created by the original current, multiplication of power can be attained, where one or more different outputs from the source can be extracted, where the system become fully self-controlled (for example if the system needs to provide 40W or 400W the system will regulate itself when it is designed by use of single or multiple (353) setup of the same system to produce maximal 400W where the output current is always in phase with the original input, where each set of wire and associated winding sets can be placed in a casing, like a tube (362), made of any material for warranting the constant equal distance and positioning of the coils and the wire where the casing can be used as a earth; 141. Method to realize inter-atomic fusion, as described in claim 10, where the strength of the one field and in conjunction with presence of the second field of a double magnetic fields can be utilized to attain inter- atomic fusion ( that is the fusion of electron and its nuclease), that is where electron from one level, (by use of magnetic field force), is pushed back into lower orbit, or in case of hydrogen the electron is push into the nuclease of the atom, this leading to the release of energy and creation of magnetically balanced atom, which is magnetically neutral but still will posses two elements of electron and proton but no neutron, this is another method for the creation of dark matter, where there is a mass - but due to balance in magnetic fi field - there is no interaction a a a Fo ee ee between the charged mater and no or very little magnetic field to create visible light, the principal of creation of comparatively large mass and no visible light in the order of electromagnetic wavelength detectable can be achieved; 142. Method to create atomic and molecular carbon, referring to claim 39, to create atomic or molecular carbon at and in environmental conditions (i.e. at room or outside temperature, atmospheric conditions), without a heating source, without adding electrons (electrical current) to trigger the initial internal process(es), without additional electromagnetic means and without pressurized conditions, in a reactor, as described is claim 1, or in a reactor, as described is claim 2, where said atomic carbon can be collected, for example as deposit of pure atomic carbon in mono-