RunYourCarOnWater_page_81

RunYourCarOnWater | page 81 | https://thedailydialectics.com/pdfs/RunYourCarOnWater/RunYourCarOnWater.pdf

4. Drill a hole in the enclosure and install a 3/8” ID grommet. Cut eight (8) 1-foot lengths of hookup wire and strip %” of insulation from one end of each wire. Route one wire through the grommet and solder it to the HyTronics “Ground” (-) bus (see Figure 5) and label the wire. Refer to the…