RunYourCarOnWater_page_63

RunYourCarOnWater | page 63 | https://thedailydialectics.com/pdfs/RunYourCarOnWater/RunYourCarOnWater.pdf

Toroid Coil Installation 1. Using a #41 drill bit, drill two holes in the housing wall at the locations shown Figure 20. 2. Cut two (2) 4” lengths of 3/32” bare stainless steel welding rod. Create a 90 degree bend in one end of each rod to form a leg approximately 1-1/2” long, as shown in Figure…