RunYourCarOnWater_page_59

RunYourCarOnWater | page 59 | https://thedailydialectics.com/pdfs/RunYourCarOnWater/RunYourCarOnWater.pdf

Bend wires back and wrap tightly. Heat Shrink Align wire Heat Shrink Tubing Straight out. Tubing Typical Splice Figure 19: Toroid Coil Details 4. Mix about a %-ounce batch of epoxy (such as J-B WELD). Using a small brush, carefully apply a thin layer of epoxy around the outer edge of the coil.…